Victorian Flooring Blog

Oak Hardwood Floor Installation Gloucester, NJ

Gloucester NJ

Newly install oak plank floor

 

    Installed 3/4″ x 5″ red oak plank floor in dining room with built in red oak vent & oak quarter round.  Sanded, stained “Nutmeg” & 3 coats waterbase satin urethane.  

Installed 3/4 ” x 5″ Select Red Oak          

Gloucester oak floors

built in oak vent

 

Stained nutmeg  &  3 coats waterbase urethane

Advertisements

July 1, 2010 Posted by | installation | , , , , , , , , , , , , | Leave a comment

5/16″ Eucalyptus & 5/16″ x 2″ Oak Cherry Hill, NJ

 

Kitchen  random width 5/16″ beveled edged eucalyptus w/dowels

Random with 5/16″ beveled edged eucalyptus w/dowels butts up to 5/16″ x 2″ oak. 

 We installed a “header board” where the two floors met.

Eucalyptus boards were  split near dishwasher.  Those boards were first epoxied

then we scraped  beveled edges and completely sanded the kitchen floor.  The eucalyptus

was stained GOLDEN BROWN with 5 coats of satin waterbase urethane.

5/16 ” x 2 ” select red oak stained golden brown with 5 coats of satin waterbase urethane

We sanded then stained oak GOLDEN BROWN with 5 coats satin waterbase. 

 We also installed oak shoe molding stained to match the oak floors.

Installed new custom made red oak side wall vent stained GOLDEN BROWN

to match existing oak floors then 5 coats of satin urethane were applied.

 

 

 

Refinished 5/16″ x 2″ oak in living room and dining room

July 1, 2010 Posted by | installation | , , , , , , , , , , , , , , | Leave a comment

One Inch Thick Maple Flooring In Philadelphia, Pa.

 
Refinished 1″ x 2-1/4″ T&G maple, stained chestnut


          

          

 
Packed up sleepers on concrete floor to help  level out  maple boards. 

     

Refinished 1" T&G maple

 

          

          

          

          

Floors  sanded and  maple filler applied between the cracks of maple boards to make the floor look aesthetically pleasing to the eye.          

 

     

           

                        Before                                                                                  After     

          

May 6, 2010 Posted by | installation, Uncategorized | , , , , , , , , , , , , | 1 Comment

Installation of Medallion & Oak Flooring Collingswood, NJ

Installed 3/4″ x 2-1/4″ Select Red Oak floor with a 6′ Brazilian Cherry Medallion.  Sanded & 3 coats waterbase urethane.

Installed 3/4″ x 2-1/4″ Rift & Quartered red oak floor with double 3/4″ x 1-1/2″ Peruvian Walnut feature strips with 3 dimensional feature strips in corners.

Installed double 3 dimensional 3/4″ x 1-1/2″  T & G Peruvian Walnut feature strips with the field (center of room) having 3/4″ x 2-1/4″ Rift & Quartered  red oak installed on a 45 degree angle with 3 coats of satin waterbase urethane.

Installed custom made 3/4″  thick  red oak cold air return in living room.  Floor sanded & 3 coats satin waterbase urethane.

Installed  3/4″ x 2-1/4″ Rift & Quartered red oak flooring on a 45 degree angle  with 3/4″ x 1-1/2″  T & G  (tongue & groove) Peruvian Walnut feature strips with reverse ribbons in corners.

Victorian  Floor Finishing Inc.

700 Stokes Avenue

Collingswood, NJ 08108

(856) 858-6465

fax : (856) 858-4349

www.VictorianFloorFinishing.com

contact   Kim@victorianfloorfinishing.com

April 6, 2010 Posted by | installation | , , , , , , , , , , , , , , , | Leave a comment