Victorian Flooring Blog

One Inch Thick Maple Flooring In Philadelphia, Pa.

 
Refinished 1″ x 2-1/4″ T&G maple, stained chestnut


          

          

 
Packed up sleepers on concrete floor to help  level out  maple boards. 

     

Refinished 1" T&G maple

 

          

          

          

          

Floors  sanded and  maple filler applied between the cracks of maple boards to make the floor look aesthetically pleasing to the eye.          

 

     

           

                        Before                                                                                  After     

          

May 6, 2010 Posted by | installation, Uncategorized | , , , , , , , , , , , , | 1 Comment

Installed Unfinished Hardwood Evesham NJ

Installed unfinished 3/4″ x2-1/4″  Rift and Quartered red oak over radiant heat .  Rift & Quartered red oak is when the grain is straight.  There is very little movement in this type of wood.  Very good for down at the shore and also for radiant heat.   Better to go with a narrower wood than a wider board to avoid cupping of wood and wide cracks caused  by humidity. These floors were stained golden oak and 3 coats waterbase satin urethane applied.  Built in oak vents were also installed on this job.

Victorian  Floor Finishing Inc.

700 Stokes Avenue

Collingswood, NJ 08108

(856) 858-6465

fax : (856) 858-4349

www.VictorianFloorFinishing.com

contact   Kim@victorianfloorfinishing.com

February 22, 2010 Posted by | installation | , , , , , , | 1 Comment