Victorian Flooring Blog

Hardwood Flooring Installation Wildwood , NJ

New installation of  3/4 ” x  2- 1/4 ” Rift and Quartered red oak hardwood flooring in Wildwood, NJ . This custom inlay has 3/4″  x 1 1/2 ” tongue and groove maple and Peruvian Walnut feature strips and a custom medallion.  Floors were sanded and left natural with three coats of gloss waterbase urethane.  Spiral staircase has red oak treads and red oak handrails.  Rift and Quartered red oak was chosen because of the high humidity levels at the shore.  Waterbase urethane does not amber (yellow) like oil base urethane.

Victorian  Floor Finishing Inc.

700 Stokes Avenue

Collingswood, NJ 08108

(856) 858-6465

fax : (856) 858-4349

www.VictorianFloorFinishing.com

contact   Kim@victorianfloorfinishing.com

Advertisements

February 22, 2010 Posted by | installation | , , , , , , , , , | Leave a comment

Installed Unfinished Hardwood Evesham NJ

Installed unfinished 3/4″ x2-1/4″  Rift and Quartered red oak over radiant heat .  Rift & Quartered red oak is when the grain is straight.  There is very little movement in this type of wood.  Very good for down at the shore and also for radiant heat.   Better to go with a narrower wood than a wider board to avoid cupping of wood and wide cracks caused  by humidity. These floors were stained golden oak and 3 coats waterbase satin urethane applied.  Built in oak vents were also installed on this job.

Victorian  Floor Finishing Inc.

700 Stokes Avenue

Collingswood, NJ 08108

(856) 858-6465

fax : (856) 858-4349

www.VictorianFloorFinishing.com

contact   Kim@victorianfloorfinishing.com

February 22, 2010 Posted by | installation | , , , , , , | 1 Comment